The VR Lab is already set up for the Vive. All you need to do is unlock the PC cart, pull it forward so it borders the edge of the green flooring, and pull out headset and controllers.You can now switch the PC on. Once you open up Steam, you can click the "VR" button in the top right corner to start SteamVR. Or, you can click the SteamVR program to start it.

The two controllers must be turned on by pressing the bottom-most buttons (the Steam buttons). If the controllers show green LEDs, they are ready to go. Otherwise, you may need to charge them using the micro-USB chargers that are included in the PC cart. If they're low on battery after you're done using them, plug them in to charge.[caption id="attachment_168" align="aligncenter" width="320"]

The Vive controller, plugged into the microUSB port on the bottom for charging. To turn the controller on, press the button directly below the circular touchpad and above the Vive logo.[/caption]